fix typo

.gitignore

@@ -1,2 +1,5 @@
 *~
 *.sw[op]
+.apps/
+.apps_git_clone_cache
+.spdx_licenses

check_process

@@ -17,7 +17,7 @@
 		upgrade=1
 		upgrade=1	from_commit=CommitHash
 		backup_restore=1
-		multi_instance=0
+		multi_instance=1
 		port_already_use=0
 		change_url=1
 ;;; Options

conf/garage.toml

@@ -1,5 +1,5 @@
 metadata_dir = "/opt/yunohost/__APP__/metadata"
-data_dir = "__DATADIR__" 
+data_dir = "__DATADIR__/data" 
 
 block_size = 1048576
 block_manager_background_tranquility = 2
@@ -13,24 +13,12 @@ rpc_secret = "__RPC_SECRET__"
 rpc_bind_addr = "[::]:__PORT__"
 # Le port peut être différent (eg NAT) mais doit rediriger sur le
 # port de rpc_bind_addr
-#rpc_public_addr = "__IP__:__PORT__"
+rpc_public_addr = "__DOMAIN__:__PORT__"
 
-bootstrap_peers = [
-    __BOOTSTRAP_PEERS_VAR__
-]
+bootstrap_peers = []
 
 [s3_api]
 # Ne supporte pas TLS → reverse proxy obligatoire
 # pour avoir de la sécurité
 api_bind_addr = "[::]:__PORT_API__"
 s3_region = "garage"
-
-[s3_web]
-bind_addr = "[::]:__PORT_WEB__"
-root_domain = ".web.garage.localhost"
-index = "index.html"
-
-[admin]
-api_bind_addr = "127.0.0.1:__PORT_ADMIN__"
-metrics_token = "cacce0b2de4bc2d9f5b5fdff551e01ac1496055aed248202d415398987e35f81"
-admin_token = "ae8cb40ea7368bbdbb6430af11cca7da833d3458a5f52086f4e805a570fb5c2a"

conf/mount_disk.sh

@@ -4,16 +4,18 @@ then
     datadir=__DATADIR__
     format=$1
     i=0
-    while $(fdisk -l /dev/nbd$i  1&>2 /dev/null)
+    while fdisk -l /dev/nbd$i  1> /dev/null 2> /dev/null
     do
         i=$(( i + 1 ))
     done
-    echo $i
+    echo $i > $datadir/nbd_index
     modprobe nbd max_part=$(( i + 1 ))
-    qemu-nbd --connect /dev/nbd$i $datadir/garage.qcow2
+    qemu-nbd --connect /dev/nbd$i $datadir/garage_data.qcow2
     if [[ "$format" = "true" ]]
     then
-        mkfs.ext4 /dev/nbd$i > /dev/null
+        echo "formatting /dev/nbd$i"
+        mkfs.ext4 /dev/nbd$i
     fi
+    mkdir -p $datadir/data
     mount /dev/nbd$i $datadir/data/
 fi

conf/systemd.service

@@ -8,8 +8,8 @@ User=__APP__
 Environment='RUST_LOG=garage=info' 'VIRTUALISATION=__VIRTUALISATION__'   'RUST_BACKTRACE=1'
 ExecStartPre=+__FINALPATH__/mount_disk.sh 
 ExecStart=__FINALPATH__/garage -c __FINALPATH__/garage.toml server
+ExecStopPost=+__FINALPATH__/umount_disk.sh 
 WorkingDirectory=__FINALPATH__/
-NoNewPrivileges=true
 StandardOutput=append:/var/log/__APP__/__APP__.log
 StandardError=inherit
 
@@ -17,16 +17,16 @@ StandardError=inherit
 # Depending on specificities of your service/app, you may need to tweak these
 # .. but this should be a good baseline
 # Details for these options: https://www.freedesktop.org/software/systemd/man/systemd.exec.html
-PrivateTmp=yes
-PrivateDevices=yes
+__VIRT_PROTECTION__PrivateTmp=yes
+#PrivateDevices=yes
 # RestrictAddressFamilies=AF_UNIX AF_INET AF_INET6
 RestrictNamespaces=yes
 RestrictRealtime=yes
-DevicePolicy=closed
-ProtectSystem=full
-ProtectControlGroups=yes
-ProtectKernelModules=yes
-ProtectKernelTunables=yes
+#DevicePolicy=closed
+__VIRT_PROTECTION__ProtectSystem=full
+__VIRT_PROTECTION__ProtectControlGroups=yes
+#ProtectKernelModules=yes
+__VIRT_PROTECTION__ProtectKernelTunables=yes
 LockPersonality=yes
 SystemCallFilter=~@clock @debug @module @mount @obsolete @reboot @setuid @swap
 

conf/umount_disk.sh

@@ -1,7 +1,8 @@
 #!/bin/bash
 if [ "$VIRTUALISATION" = "true" ] 
 then
-    nbd=__NBD_INDEX__
+     datadir=__DATADIR__
+    nbd=$(cat $datadir/nbd_index)
     umount  /dev/nbd$nbd
     qemu-nbd --disconnect  /dev/nbd$nbd
 fi

config_panel.toml

@@ -0,0 +1,37 @@
+version = "1.0"
+[main]
+
+
+    [main.garage_conf]
+    name = "Garage configuration"
+
+
+        [main.garage_conf.weight]
+        ask = "allocated space (Gio)"
+        help = "This value is doubled used by yunohost. It set the weight of the garage node and if virtualisation is enabled, it create a virtual disk with the same size"
+        type = "number"
+        bind = "weight()"
+
+        [main.garage_conf.bootstrap_peers]
+        ask = "Friend serveur adress"
+        help = "add bootstrap_peers address to connect to existing cluster"
+        type = "string"
+        bind = "null"
+        pattern.regexp =  '[0-9a-f]{64}@((\b25[0-5]|\b2[0-4][0-9]|\b[01]?[0-9][0-9]?)(\.(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)){3}|([a-zA-Z0-9][a-zA-Z0-9-]{0,61}[a-zA-Z0-9]\.)+[a-zA-Z]{2,}):[0-9]{1,4}' 
+        pattern.error = "friend server id must have id with the following form : 1799bccfd7411eddcf9ebd316bc1f5287ad12a68094e1c6ac6abde7e6feae1ec@192.168.1.1:1234 or  1799bccfd7411eddcf9ebd316bc1f5287ad12a68094e1c6ac6abde7e6feae1ec@example.tld:1234"
+
+[danger]
+services = ["__APP__"]
+        
+    [danger.sensible]
+    name = "Danger Zone"
+
+        [danger.sensible.rpc_secret]
+        ask = "Choose/Change rpc secret"
+        type = "string"
+        redact = true
+        bind = "rpc_secret:/opt/yunohost/__APP__/garage.toml"
+        pattern.regexp = '^[0-9a-f]{64}$'
+        pattern.error = "rpc_secret have to be a 32-byte hex-encoded random string. See https://garagehq.deuxfleurs.fr/documentation/reference-manual/configuration/ for more information"
+        help = "Be careful if your node is already connected to a cluster, it won't be able to connect anymore if you change the rpc_secret value"
+

config_panel.toml.example

@@ -89,7 +89,7 @@ services = ["__APP__"]
     
     ## (optional) By default all questions are optionals, but you can specify a
     ## default behaviour for question in the section
-    optional = false
+    ##optional = false
         
     ## (optional) It's also possible with the 'visible' property to only
     ## display the section depending on the user's answers to previous questions.
@@ -118,14 +118,14 @@ services = ["__APP__"]
         ## extend availables questions types list.
         ## See: TODO DOC LINK
         
-        [main.customization.project_name]
+        [main.customization.weight]
         
         ## (required) The ask property is equivalent to the ask property in 
         ## the manifest. However, in config panels, questions are displayed on the
         ## left side and therefore have less space to be rendered. Therefore, 
         ## it is better to use a short question, and use the "help" property to
         ## provide additional details if necessary.
-        ask.en = "Name of the project"
+        ask.en = "allocated space"
 
         ## (required) The type property indicates how the question should be 
         ## displayed, validated and managed. Some types have specific properties.
@@ -134,7 +134,7 @@ services = ["__APP__"]
         ## email, url, date, time, color, select, domain, user, tags, file.
         ##
         ## For a complete list with specific properties, see: TODO DOC LINK
-        type = "string"
+        type = "number"
         
         ########################################################################
         #### ABOUT THE BIND PROPERTY

hooks/regen_conf

@@ -0,0 +1,10 @@
+#!/bin/bash
+
+source /usr/share/yunohost/helpers
+
+
+action=$1
+domain=__DOMAIN__
+
+ynh_replace_special_string --match_string="server_name $domain" --replace_string="server_name $domain *.$domain" --target_file="/etc/nginx/conf.d/$domain.conf"
+ynh_store_file_checksum --file="/etc/nginx/conf.d/$domain.conf"

manifest.json

@@ -6,10 +6,10 @@
         "en": "S3 storage",
         "fr": "stockage S3"
     },
-    "version": "0.7.3~ynh1",
+    "version": "0.8.0~ynh1",
     "url": "https://garagehq.deuxfleurs.fr/",
     "upstream": {
-        "license": "free",
+        "license": "AGPL-3.0-only",
         "website": "https://garagehq.deuxfleurs.fr/",
         "admindoc": "https://garagehq.deuxfleurs.fr/documentation/quick-start/",
         "userdoc": "https://garagehq.deuxfleurs.fr/documentation/quick-start/",
@@ -24,7 +24,7 @@
     "requirements": {
         "yunohost": ">= 4.3.0"
     },
-    "multi_instance": false,
+    "multi_instance": true,
     "arguments": {
         "install": [
             {

scripts/_common.sh

@@ -3,14 +3,14 @@
 #=================================================
 # COMMON VARIABLES
 #=================================================
-pkg_dependencies_virtualisation="qemu-utils"
+pkg_dependencies_virtualisation="qemu-utils e2fsprogs"
 
 #=================================================
 # PERSONAL HELPERS
 #=================================================
 
 
-GARAGE_VERSION="0.7.3"
+GARAGE_VERSION="0.8.0"
 
 get_ip() {
   curl ip.me
@@ -41,25 +41,35 @@ install_garage () {
     chmod +x garage
 }
 
-init_garage() {
-garage_command="$1"
-node_id="$2"
-weight="$3"
-zone="$4"
-
-$garage_command layout assign $node_id -z $zone -c $weight -t $zone
-
-apply_layout "$garage_command"
+garage_connect() {
+  local command="$1"
+  local peer="$2" 
+  # connect to cluster
+  $command node connect "$peer"
+  sleep 2
+  # wait until layout is updated
+  local i=0
+  until $command layout show 2>/dev/null | grep "${peer:0:15}"; do
+    i=$(( i + 1 ))
+    if [ $i -gt 30 ] 
+    then
+      ynh_die --message="unable to get layout from remote peer"
+    fi
+    sleep 1
+  done
 }
 
+
 apply_layout() {
+    
 	garage_command=$1
-	
-	if [ $($garage_command -c garage.toml layout show 2>/dev/null | grep -- --version)  ] 
+	$garage_command layout show 2>/dev/null
+	local layout_version=$($garage_command layout show 2>/dev/null | grep -Po -- "(?<=--version).*" | head -1 | xargs)
+	if [ "$layout_version" != ""  ] 
 	then
-		layout_version=$($garage_command layout show 2>/dev/null | grep -Po -- "(?<=--version).*" | head -1 | xargs)
 		$garage_command layout apply --version $layout_version
 	else
+        ynh_print_warn --message="unable to apply layout. No enough nodes"
 		return 0
 	fi
 }

scripts/config

@@ -1,19 +1,11 @@
 #!/bin/bash
-# In simple cases, you don't need a config script. 
-
-# With a simple config_panel.toml, you can write in the app settings, in the 
-# upstream config file or replace complete files (logo ...) and restart services.
-
-# The config scripts allows you to go further, to handle specific cases 
-# (validation of several interdependent fields, specific getter/setter for a value,
-# display dynamic informations or choices, pre-loading of config type .cube... ).
-
 #=================================================
 # GENERIC STARTING
 #=================================================
 # IMPORT GENERIC HELPERS
 #=================================================
 
+source _common.sh
 source /usr/share/yunohost/helpers
 
 ynh_abort_if_errors
@@ -23,78 +15,54 @@ ynh_abort_if_errors
 #=================================================
 
 final_path=$(ynh_app_setting_get $app final_path)
+node_id=$(ynh_app_setting_get $app node_id)
+virtualisation=$(ynh_app_setting_get $app virtualisation)
 datadir=$(ynh_app_setting_get $app datadir)
+nbd_index=$(ynh_app_setting_get $app nbd_index)
+command="$final_path/garage -c $final_path/garage.toml"
 
-#=================================================
-# SPECIFIC GETTERS FOR TOML SHORT KEY
-#=================================================
+get__weight() {
+    ynh_app_setting_get --app=$app --key=weight
+}
 
-get__amount() {
-    # Here we can imagine to have an API call to stripe to know the amount of donation during a month
-    local amount = 200
-
-    # It's possible to change some properties of the question by overriding it:
-    if [ $amount -gt 100 ]
+set__weight() {
+    if [ "$virtualisation" = "true" ] 
     then
-    cat << EOF
-style: success
-value: $amount
-ask:
-  en: A lot of donation this month: **$amount €**
-EOF
-    else
-    cat << EOF
-style: danger
-value: $amount
-ask:
-  en: Not so much donation this month: $amount €
-EOF
-    fi
-}
-
-get__prices() {
-    local prices = "$(grep "DONATION\['" "$final_path/settings.py" | sed -r "s@^DONATION\['([^']*)'\]\['([^']*)'\] = '([^']*)'@\1/\2/\3@g" | sed -z 's/\n/,/g;s/,$/\n/')"
-    if [ "$prices" == "," ];
-    then
-        # Return YNH_NULL if you prefer to not return a value at all.
-        echo YNH_NULL
-    else
-        echo $prices
+        systemctl stop $YNH_APP_INSTANCE_NAME
+        old_weight="$ynh_app_setting_get --app=$app --key=weight"
+        if [ $old_weight -le $weight }
+        then
+            $final_path/umount_disk.sh $nbd_index
+            qemu-img resize $datadir/$datadir/garage_data.qcow2 $weightG
+            qemu-nbd --connect /dev/nbd$nbd_index $datadir/garage.qcow2
+            e2fsck -f /dev/nbd$nbd_index
+            resize2fs /dev/nbd$nbd_index
+            mount /dev/nbd$nbd_index $datadir/data/
+        else
+            umount /dev/nbd$nbd_index
+            e2fsck -f /dev/nbd$nbd_index
+            resize2fs /dev/nbd$nbd_index $weightG
+            qemu-nbd --disconnect /dev/nbd$nbd_index
+            qemu-img resize $datadir/$datadir/garage_data.qcow2 $weightG
+            $nbd_index=$(final_path/mount_disk.sh false)
+            ynh_app_setting_set --app=$app --key=nbd_index --value=$nbd_index
+        fi
+        systemctl start $YNH_APP_INSTANCE_NAME
     fi
+    $command layout assign $node_id -c $weight 2>/dev/null
+    apply_layout "$command"
+    ynh_app_setting_set --app=$app --key=weight --value=$weight
 }
 
 
-#=================================================
-# SPECIFIC VALIDATORS FOR TOML SHORT KEYS
-#=================================================
-validate__publishable_key() {
-
-    # We can imagine here we test if the key is really a publisheable key
-    (is_secret_key $publishable_key) &&
-        echo 'This key seems to be a secret key'
+get__bootstrap_peers() {
+    ynh_app_setting_get --app=$app --key=bootstrap_peers
 }
 
-#=================================================
-# SPECIFIC SETTERS FOR TOML SHORT KEYS
-#=================================================
-set__prices() {
-
-    #---------------------------------------------
-    # IMPORTANT: setter are trigger only if a change is detected
-    #---------------------------------------------
-    for price in $(echo $prices | sed "s/,/ /"); do
-        frequency=$(echo $price | cut -d/ -f1)
-        currency=$(echo $price | cut -d/ -f2)
-        price_id=$(echo $price | cut -d/ -f3)
-        sed "d/DONATION\['$frequency'\]\['$currency'\]" "$final_path/settings.py"
-
-        echo "DONATION['$frequency']['$currency'] = '$price_id'" >> "$final_path/settings.py"
-    done
-    
-    #---------------------------------------------
-    # IMPORTANT: to be able to upgrade properly, you have to saved the value in settings too
-    #---------------------------------------------
-    ynh_app_setting_set $app prices $prices
+set__bootstrap_peers() {
+    garage_connect "$command" "$bootstrap_peers" 2>/dev/null
+    apply_layout "$command"
+    ynh_app_setting_set --app=$app --key=bootstrap_peers --value=$bootstrap_peers
 }
 
 #=================================================

scripts/install

@@ -50,15 +50,15 @@ app=$YNH_APP_INSTANCE_NAME
 #=================================================
 # CHECK IF THE APP CAN BE INSTALLED WITH THESE ARGS
 #=================================================
-### About --weight and --time
+### About --weight and 
 ### ynh_script_progression will show to your final users the progression of each scripts.
 ### In order to do that, --weight will represent the relative time of execution compared to the other steps in the script.
-### --time is a packager option, it will show you the execution time since the previous call.
+###  is a packager option, it will show you the execution time since the previous call.
 ### This option should be removed before releasing your app.
-### Use the execution time, given by --time, to estimate the weight of a step.
+### Use the execution time, given by , to estimate the weight of a step.
 ### A common way to do it is to set a weight equal to the execution time in second +1.
 ### The execution time is given for the duration since the previous call. So the weight should be applied to this previous call.
-ynh_script_progression --message="Validating installation parameters..." --time --weight=1
+ynh_script_progression --message="Validating installation parameters..."  --weight=1
 
 ### If the app uses NGINX as web server (written in HTML/PHP in most cases), the final path should be "/var/www/$app".
 ### If the app provides an internal web server (or uses another application server such as uWSGI), the final path should be "/opt/yunohost/$app"
@@ -73,10 +73,7 @@ else
 fi
 if [ -n "$bootstrap_peers" ] 
 then
-	echo "$bootstrap_peers" | grep -E '[0-9a-f]{64}@(\b25[0-5]|\b2[0-4][0-9]|\b[01]?[0-9][0-9]?)(\.(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)){3}:3901' || ynh_die --message="friend server id must have id with the following form : 1799bccfd7411eddcf9ebd316bc1f5287ad12a68094e1c6ac6abde7e6feae1ec@192.168.1.1:3901"
-	bootstrap_peers_var="\"$bootstrap_peers\","
-else
-	bootstrap_peers_var=""
+	echo "$bootstrap_peers" | grep -E '[0-9a-f]{64}@((\b25[0-5]|\b2[0-4][0-9]|\b[01]?[0-9][0-9]?)(\.(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)){3}|([a-zA-Z0-9][a-zA-Z0-9-]{0,61}[a-zA-Z0-9]\.)+[a-zA-Z]{2,}):[0-9]{1,4}' || ynh_die --message="friend server id must have id with the following form : 1799bccfd7411eddcf9ebd316bc1f5287ad12a68094e1c6ac6abde7e6feae1ec@192.168.1.1:1234 or  1799bccfd7411eddcf9ebd316bc1f5287ad12a68094e1c6ac6abde7e6feae1ec@example.tld:1234"
 fi
 
 if [ "$datadir" = "/home/yunohost.app/__APP_NAME__/data" ]
@@ -90,25 +87,32 @@ ynh_webpath_register --app=$app --domain=$domain --path_url="/"
 #=================================================
 # LOOKING FOR VIRTUALISATION
 #=================================================
-ynh_script_progression --message="Checking virtualisation availability…" --time --weight=1
+ynh_script_progression --message="Checking virtualisation availability…" --weight=1
 
 if [  "$(which modprobe)" = ""  ] 
 then
 	virtualisation=false
+	export VIRTUALISATION=false
+	# uncomment systemd isolation
+	virt_protection=""
 else
+    export VIRTUALISATION=true
 	virtualisation=true
+	# comment systemd isolation to allow mount disk
+	virt_protection="#"
 fi
-ynh_app_setting_set --app=$app --key=virtualisation --value=true
+ynh_app_setting_set --app=$app --key=virtualisation --value=$virtualisation
 
 #=================================================
 # STORE SETTINGS FROM MANIFEST
 #=================================================
-ynh_script_progression --message="Storing installation settings..." --time --weight=1
+ynh_script_progression --message="Storing installation settings..."  --weight=1
 
 ynh_app_setting_set --app=$app --key=domain --value=$domain
 ynh_app_setting_set --app=$app --key=rpc_secret --value=$rpc_secret
 ynh_app_setting_set --app=$app --key=datadir --value=$datadir
 ynh_app_setting_set --app=$app --key=bootstrap_peers --value=$bootstrap_peers
+ynh_app_setting_set --app=$app --key=weight --value=$weight
 
 
 #=================================================
@@ -116,7 +120,7 @@ ynh_app_setting_set --app=$app --key=bootstrap_peers --value=$bootstrap_peers
 #=================================================
 # FIND AND OPEN A PORT
 #=================================================
-ynh_script_progression --message="Finding available ports..." --time --weight=1
+ynh_script_progression --message="Finding available ports..."  --weight=1
 
 ### Use these lines if you have to open a port for the application
 ### `ynh_find_port` will find the first available port starting from the given port.
@@ -129,12 +133,6 @@ port=$(ynh_find_port --port=4000)
 ynh_app_setting_set --app=$app --key=port --value=$port
 port_api=$(ynh_find_port --port=5000)
 ynh_app_setting_set --app=$app --key=port_api --value=$port_api
-port_web=$(ynh_find_port --port=6000)
-ynh_app_setting_set --app=$app --key=port_web --value=$port_web
-port_admin=$(ynh_find_port --port=7000)
-ynh_app_setting_set --app=$app --key=port_admin --value=$port_admin
-
-ynh_print_warn --message="port : $port port_api : $port_api port_web : $port_web port_admin : $port_admin"
 
 
 # Optional: Expose this port publicly
@@ -142,13 +140,13 @@ ynh_print_warn --message="port : $port port_api : $port_api port_web : $port_web
 # If you do this and the app doesn't actually need you are CREATING SECURITY HOLES IN THE SERVER !)
 
 # Open the port
- ynh_script_progression --message="Configuring firewall..." --time --weight=1
+ ynh_script_progression --message="Configuring firewall..."  --weight=1
  ynh_exec_warn_less yunohost firewall allow TCP $port
 
 #=================================================
 # INSTALL DEPENDENCIES
 #=================================================
-ynh_script_progression --message="Installing dependencies..." --time --weight=1
+ynh_script_progression --message="Installing dependencies..."  --weight=1
 
 ### `ynh_install_app_dependencies` allows you to add any "apt" dependencies to the package.
 ### Those deb packages will be installed as dependencies of this package.
@@ -164,7 +162,7 @@ fi
 #=================================================
 # CREATE DEDICATED USER
 #=================================================
-ynh_script_progression --message="Configuring system user..." --time --weight=1
+ynh_script_progression --message="Configuring system user..."  --weight=1
 
 # Create a system user
 ynh_system_user_create --username=$app --home_dir="$final_path"
@@ -172,7 +170,7 @@ ynh_system_user_create --username=$app --home_dir="$final_path"
 #=================================================
 # DOWNLOAD, CHECK AND UNPACK SOURCE
 #=================================================
-ynh_script_progression --message="Setting up source files..." --time --weight=1
+ynh_script_progression --message="Setting up source files..."  --weight=1
 
 ### `ynh_setup_source` is used to install an app from a zip or tar.gz file,
 ### downloaded from an upstream source, like a git repository.
@@ -200,7 +198,7 @@ chown -R $app:$app "$final_path"
 #=================================================
 # NGINX CONFIGURATION
 #=================================================
-ynh_script_progression --message="Configuring NGINX web server..." --time --weight=1
+ynh_script_progression --message="Configuring NGINX web server..."  --weight=1
 
 ### `ynh_add_nginx_config` will use the file conf/nginx.conf
 
@@ -208,7 +206,7 @@ ynh_script_progression --message="Configuring NGINX web server..." --time --weig
 ynh_add_nginx_config
 
 #add wildcard subdomain
-ynh_replace_string --match_string="server_name $domain" --replace_string="server_name $domain *.$domain" --target_file="/etc/nginx/conf.d/$domain.conf"
+ynh_replace_special_string --match_string="server_name $domain" --replace_string="server_name $domain *.$domain" --target_file="/etc/nginx/conf.d/$domain.conf"
 ynh_store_file_checksum --file="/etc/nginx/conf.d/$domain.conf"
 #=================================================
 # SPECIFIC SETUP
@@ -219,7 +217,7 @@ ynh_store_file_checksum --file="/etc/nginx/conf.d/$domain.conf"
 #=================================================
 # ADD A CONFIGURATION
 #=================================================
-ynh_script_progression --message="Adding a configuration file..." --time --weight=1
+ynh_script_progression --message="Adding a configuration file..."  --weight=1
 
 ### You can add specific configuration files.
 ###
@@ -255,7 +253,7 @@ chown $app:$app "$final_path/garage.toml"
 #=================================================
 # CREATE DATA DIRECTORY
 #=================================================
-ynh_script_progression --message="Creating a data directory..." --time --weight=1
+ynh_script_progression --message="Creating a data directory..."  --weight=1
 
 ### Use these lines if you need to create a directory to store "persistent files" for the application.
 ### Usually this directory is used to store uploaded files or any file that won't be updated during 
@@ -272,13 +270,12 @@ mkdir -p $datadir/data
 #=================================================
 # create data partition
 #=================================================
-nbd_index=127
+
 if [ "$virtualisation" = "true" ]
 then
 	# to be sure to not exceed size limit, i use a virtual disk with a fix size to have a max limit size.
 	qemu-img create -f qcow2 $datadir/garage_data.qcow2 "$weight"G
-	nbd_index=$($final_path/mount_disk.sh true)
-	ynh_app_setting_set --app=$app --key=nbd_index --value=$nbd_index
+	VIRTUALISATION=true $final_path/mount_disk.sh true
 fi
 
 # FIXME: this should be managed by the core in the future
@@ -293,13 +290,13 @@ chown -R $app:$app "$datadir"
 
 if [ "$virtualisation" = "true" ]
 then
-	$final_path/umount_disk.sh $nbd_index
+	VIRTUALISATION=true $final_path/umount_disk.sh
 fi
 
 #=================================================
 # SETUP SYSTEMD
 #=================================================
-ynh_script_progression --message="Configuring a systemd service..." --time --weight=1
+ynh_script_progression --message="Configuring a systemd service..."  --weight=1
 
 ### `ynh_systemd_config` is used to configure a systemd script for an app.
 ### It can be used for apps that use sysvinit (with adaptation) or systemd.
@@ -320,7 +317,7 @@ ynh_add_systemd_config
 #=================================================
 # SETUP LOGROTATE
 #=================================================
-ynh_script_progression --message="Configuring log rotation..." --time --weight=1
+ynh_script_progression --message="Configuring log rotation..."  --weight=1
 
 ### `ynh_use_logrotate` is used to configure a logrotate configuration for the logs of this app.
 ### Use this helper only if there is effectively a log file for this app.
@@ -336,7 +333,7 @@ ynh_use_logrotate
 #=================================================
 # INTEGRATE SERVICE IN YUNOHOST
 #=================================================
-ynh_script_progression --message="Integrating service in YunoHost..." --time --weight=1
+ynh_script_progression --message="Integrating service in YunoHost..."  --weight=1
 
 ### `yunohost service add` integrates a service in YunoHost. It then gets
 ### displayed in the admin interface and through the others `yunohost service` commands.
@@ -369,7 +366,7 @@ yunohost service add --needs_exposed_ports $port --description="s3 storage" --lo
 #=================================================
 # START SYSTEMD SERVICE
 #=================================================
-ynh_script_progression --message="Starting a systemd service..." --time --weight=1
+ynh_script_progression --message="Starting a systemd service..."  --weight=1
 
 ### `ynh_systemd_action` is used to start a systemd service for an app.
 ### Only needed if you have configure a systemd service
@@ -386,7 +383,7 @@ ynh_systemd_action --service_name=$app --action="start" --log_path="/var/log/$ap
 #=================================================
 # SETUP SSOWAT
 #=================================================
-ynh_script_progression --message="Configuring permissions..." --time --weight=1
+ynh_script_progression --message="Configuring permissions..."  --weight=1
 
 	# Everyone can access the app.
 	# The "main" permission is automatically created before the install script.
@@ -395,7 +392,7 @@ ynh_script_progression --message="Configuring permissions..." --time --weight=1
 #=================================================
 # RELOAD NGINX
 #=================================================
-ynh_script_progression --message="Reloading NGINX web server..." --time --weight=1
+ynh_script_progression --message="Reloading NGINX web server..."  --weight=1
 
 ynh_systemd_action --service_name=nginx --action=reload
 
@@ -403,27 +400,44 @@ ynh_systemd_action --service_name=nginx --action=reload
 #=================================================
 # CONFIGURE GARAGE
 #=================================================
-ynh_script_progression --message="Configuring garage..." --time --weight=1
+ynh_script_progression --message="Configuring garage..."  --weight=1
 
 garage_command="$final_path/garage -c $final_path/garage.toml"
 
-node_id=$($garage_command node id -q | cut -d '@' -f1)
-ynh_app_setting_set --app=$app --key=node_id --value=node_id
+node_id=$($garage_command node id -q 2>/dev/null | cut -d '@' -f1)
+ynh_app_setting_set --app=$app --key=node_id --value=$node_id
 
 
-init_garage "$garage_command" "$node_id" "$weight" "$domain" 
+# define node
+$garage_command layout assign $node_id -z $domain -c $weight -t $domain
+# if there is enough node, apply layout
+apply_layout "$garage_command"
+
+if [ -n "$bootstrap_peers" ] 
+then
+	garage_connect "$garage_command" "$bootstrap_peers"
+fi
+
+self_bootstrap_peers="$($garage_command node id --quiet)"
+garage_layout="$($garage_command layout show)"
 
 #=================================================
 # Send email to admin
 #=================================================
-app_message="your garage node have been installed. You can now connect to other nodes with the following identifiers : \
-	rpc_secret: $rpc_secret
-	bootstrap_peers: $bootstrap_peers"
+app_message="
+your garage node have been installed. You can now connect to other nodes with the following identifiers :
 
-ynh_send_readme_to_admin --app_message=$app_message
+	rpc_secret: $rpc_secret
+	bootstrap_peers: $self_bootstrap_peers
+	
+Current garage layout : 
+
+$garage_layout"
+
+ynh_send_readme_to_admin --app_message="$app_message"
 
 #=================================================
 # END OF SCRIPT
 #=================================================
 
-ynh_script_progression --message="Installation of $app completed" --time --last
+ynh_script_progression --message="Installation of $app completed"  --last

scripts/remove

@@ -12,7 +12,7 @@ source /usr/share/yunohost/helpers
 #=================================================
 # LOAD SETTINGS
 #=================================================
-ynh_script_progression --message="Loading installation settings..." --time --weight=1
+ynh_script_progression --message="Loading installation settings..."  --weight=1
 
 app=$YNH_APP_INSTANCE_NAME
 
@@ -28,7 +28,7 @@ final_path=$(ynh_app_setting_get --app=$app --key=final_path)
 virtualisation=$(ynh_app_setting_get --app=$app --key=virtualisation)
 if [ "$virtualisation" = "true" ]
 then
-	nbd_index=$(ynh_app_setting_get --app=$app --key=nbd_index)
+	export VIRTUALISTATION=true
 fi
 #=================================================
 # REMOVE NODE CONFIGURATION
@@ -51,14 +51,14 @@ fi
 # Remove the service from the list of services known by YunoHost (added from `yunohost service add`)
 if ynh_exec_warn_less yunohost service status $app >/dev/null
 then
-	ynh_script_progression --message="Removing $app service integration..." --time --weight=1
+	ynh_script_progression --message="Removing $app service integration..."  --weight=1
 	yunohost service remove $app
 fi
 
 #=================================================
 # STOP AND REMOVE SERVICE
 #=================================================
-ynh_script_progression --message="Stopping and removing the systemd service..." --time --weight=1
+ynh_script_progression --message="Stopping and removing the systemd service..."  --weight=1
 
 # Remove the dedicated systemd config
 ynh_remove_systemd_config
@@ -66,7 +66,7 @@ ynh_remove_systemd_config
 #=================================================
 # REMOVE LOGROTATE CONFIGURATION
 #=================================================
-ynh_script_progression --message="Removing logrotate configuration..." --time --weight=1
+ynh_script_progression --message="Removing logrotate configuration..."  --weight=1
 
 # Remove the app-specific logrotate config
 ynh_remove_logrotate
@@ -77,15 +77,15 @@ then
 	#=================================================
 	# REMOVE VIRTUAL DISK
 	#=================================================
-	ynh_script_progression --message="umount virtual disk..." --time --weight=1
+	ynh_script_progression --message="umount virtual disk..."  --weight=1
 
 	# Remove the app directory securely
-	$final_path/umount_disk.sh  $nbd_index
+	$final_path/umount_disk.sh
 fi
 #=================================================
 # REMOVE APP MAIN DIR
 #=================================================
-ynh_script_progression --message="Removing app main directory..." --time --weight=1
+ynh_script_progression --message="Removing app main directory..."  --weight=1
 
 # Remove the app directory securely
 ynh_secure_remove --file="$final_path"
@@ -93,18 +93,13 @@ ynh_secure_remove --file="$final_path"
 #=================================================
 # REMOVE DATA DIR
 #=================================================
-
-# Remove the data directory if --purge option is used
-if [ "${YNH_APP_PURGE:-0}" -eq 1 ]
-then
-	ynh_script_progression --message="Removing app data directory..." --time --weight=1
-	ynh_secure_remove --file="$datadir"
-fi
+ynh_script_progression --message="Removing app data directory..."  --weight=1
+ynh_secure_remove --file="$datadir"
 
 #=================================================
 # REMOVE NGINX CONFIGURATION
 #=================================================
-ynh_script_progression --message="Removing NGINX web server configuration..." --time --weight=1
+ynh_script_progression --message="Removing NGINX web server configuration..."  --weight=1
 
 # Remove the dedicated NGINX config
 ynh_remove_nginx_config
@@ -116,7 +111,7 @@ ynh_store_file_checksum --file="/etc/nginx/conf.d/$domain.conf"
 #=================================================
 # REMOVE DEPENDENCIES
 #=================================================
-ynh_script_progression --message="Removing dependencies..." --time --weight=1
+ynh_script_progression --message="Removing dependencies..."  --weight=1
 
 # Remove metapackage and its dependencies
 ynh_remove_app_dependencies
@@ -127,7 +122,7 @@ ynh_remove_app_dependencies
 
 if yunohost firewall list | grep -q "\- $port$"
 then
-	ynh_script_progression --message="Closing port $port..." --time --weight=1
+	ynh_script_progression --message="Closing port $port..."  --weight=1
 	ynh_exec_warn_less yunohost firewall disallow TCP $port
 fi
 
@@ -137,7 +132,7 @@ fi
 #=================================================
 # REMOVE VARIOUS FILES
 #=================================================
-ynh_script_progression --message="Removing various files..." --time --weight=1
+ynh_script_progression --message="Removing various files..."  --weight=1
 
 # Remove the log files
 ynh_secure_remove --file="/var/log/$app"
@@ -147,7 +142,7 @@ ynh_secure_remove --file="/var/log/$app"
 #=================================================
 # REMOVE DEDICATED USER
 #=================================================
-ynh_script_progression --message="Removing the dedicated system user..." --time --weight=1
+ynh_script_progression --message="Removing the dedicated system user..."  --weight=1
 
 # Delete a system user
 ynh_system_user_delete --username=$app
@@ -156,4 +151,4 @@ ynh_system_user_delete --username=$app
 # END OF SCRIPT
 #=================================================
 
-ynh_script_progression --message="Removal of $app completed" --time --last
+ynh_script_progression --message="Removal of $app completed"  --last

scripts/restore

@@ -24,7 +24,7 @@ ynh_abort_if_errors
 #=================================================
 # LOAD SETTINGS
 #=================================================
-ynh_script_progression --message="Loading installation settings..." --time --weight=1
+ynh_script_progression --message="Loading installation settings..."  --weight=1
 
 app=$YNH_APP_INSTANCE_NAME
 
@@ -32,12 +32,12 @@ domain=$(ynh_app_setting_get --app=$app --key=domain)
 final_path=$(ynh_app_setting_get --app=$app --key=final_path)
 datadir=$(ynh_app_setting_get --app=$app --key=datadir)
 virtualisation=$(ynh_app_setting_get --app=$app --key=virtualisation)
-
+bootstrap_peers=$(ynh_app_setting_get --app=$app --key=bootstrap_peers)
 
 #=================================================
 # CHECK IF THE APP CAN BE RESTORED
 #=================================================
-ynh_script_progression --message="Validating restoration parameters..." --time --weight=1
+ynh_script_progression --message="Validating restoration parameters..."  --weight=1
 
 test ! -d $final_path \
 	|| ynh_die --message="There is already a directory: $final_path "
@@ -47,7 +47,7 @@ test ! -d $final_path \
 #=================================================
 # RECREATE THE DEDICATED USER
 #=================================================
-ynh_script_progression --message="Recreating the dedicated system user..." --time --weight=1
+ynh_script_progression --message="Recreating the dedicated system user..."  --weight=1
 
 # Create the dedicated user (if not existing)
 ynh_system_user_create --username=$app --home_dir="$final_path"
@@ -55,7 +55,7 @@ ynh_system_user_create --username=$app --home_dir="$final_path"
 #=================================================
 # RESTORE THE APP MAIN DIR
 #=================================================
-ynh_script_progression --message="Restoring the app main directory..." --time --weight=1
+ynh_script_progression --message="Restoring the app main directory..."  --weight=1
 
 ynh_restore_file --origin_path="$final_path"
 
@@ -72,24 +72,22 @@ chown -R $app:$app "$final_path"
 #=================================================
 # RESTORE THE DATA DIRECTORY
 #=================================================
-ynh_script_progression --message="Restoring the data directory..." --time --weight=1
+ynh_script_progression --message="Restoring the data directory..."  --weight=1
 
 mkdir -p "$datadir/data"
 
 if [ "$virtualisation" = "true" ]
 then
+    export VIRTUALISATION=true
 	# Define and install dependencies
 	ynh_install_app_dependencies $pkg_dependencies_virtualisation
 	# to be sure to not exceed size limit, i use a virtual disk with a fix size to have a max limit size.
 	qemu-img create -f qcow2 $datadir/garage_data.qcow2 "$weight"G
-	nbd_index=$($final_path/mount_disk.sh "$datadir" true)
-	ynh_app_setting_set --app=$app --key=nbd_index --value=$nbd_index
+	$final_path/mount_disk.sh true
 fi
 
-#ynh_restore_file --origin_path="$datadir/data" --not_mandatory
 
-
-# FIXME: this should be managed by the core in the future
+# # FIXME: this should be managed by the core in the future
 # Here, as a packager, you may have to tweak the ownerhsip/permissions
 # such that the appropriate users (e.g. maybe www-data) can access
 # files in some cases.
@@ -102,29 +100,25 @@ chown -R $app:$app "$datadir"
 #=================================================
 # SPECIFIC RESTORATION
 #=================================================
-# REINSTALL DEPENDENCIES
-#=================================================
-ynh_script_progression --message="Reinstalling dependencies..." --time --weight=1
-
 
 # Open the port
- ynh_script_progression --message="Configuring firewall..." --time --weight=1
+ ynh_script_progression --message="Configuring firewall..."  --weight=1
  ynh_exec_warn_less yunohost firewall allow TCP $port
 
 #=================================================
 # RESTORE THE NGINX CONFIGURATION
 #=================================================
-ynh_script_progression --message="Restoring the NGINX web server configuration..." --time --weight=1
+ynh_script_progression --message="Restoring the NGINX web server configuration..."  --weight=1
 
 ynh_restore_file --origin_path="/etc/nginx/conf.d/$domain.d/$app.conf"
 #add wildcard subdomain
-ynh_replace_string --match_string="server_name $domain" --replace_string="server_name $domain *.$domain" --target_file="/etc/nginx/conf.d/$domain.conf"
+ynh_replace_special_string --match_string="server_name $domain" --replace_string="server_name $domain *.$domain" --target_file="/etc/nginx/conf.d/$domain.conf"
 
 
 #=================================================
 # RESTORE SYSTEMD
 #=================================================
-ynh_script_progression --message="Restoring the systemd configuration..." --time --weight=1
+ynh_script_progression --message="Restoring the systemd configuration..."  --weight=1
 
 ynh_restore_file --origin_path="/etc/systemd/system/$app.service"
 systemctl enable $app.service --quiet
@@ -132,21 +126,21 @@ systemctl enable $app.service --quiet
 #=================================================
 # RESTORE THE LOGROTATE CONFIGURATION
 #=================================================
-ynh_script_progression --message="Restoring the logrotate configuration..." --time --weight=1
+ynh_script_progression --message="Restoring the logrotate configuration..."  --weight=1
 
 ynh_restore_file --origin_path="/etc/logrotate.d/$app"
 
 #=================================================
 # INTEGRATE SERVICE IN YUNOHOST
 #=================================================
-ynh_script_progression --message="Integrating service in YunoHost..." --time --weight=1
+ynh_script_progression --message="Integrating service in YunoHost..."  --weight=1
 
 yunohost service add --needs_exposed_ports $port --description="s3 storage" --log="/var/log/$app/$app.log" $app
 
 #=================================================
 # START SYSTEMD SERVICE
 #=================================================
-ynh_script_progression --message="Starting a systemd service..." --time --weight=1
+ynh_script_progression --message="Starting a systemd service..."  --weight=1
 
 ynh_systemd_action --service_name=$app --action="start" --log_path="/var/log/$app/$app.log"
 
@@ -158,6 +152,11 @@ weight=$(ynh_app_setting_get --app=$app --key=weight)
 
 garage_command="$garage_path/garage -c $garage_path/garage.toml"
 
+if [ -n "$bootstrap_peers" ] 
+then
+	$garage_command id connect "$bootstrap_peers"
+fi
+
 init_garage "$garage_command" "$node_id" "$weight" "$domain" 
 
 #=================================================
@@ -165,7 +164,7 @@ init_garage "$garage_command" "$node_id" "$weight" "$domain"
 #=================================================
 # RELOAD NGINX AND PHP-FPM
 #=================================================
-ynh_script_progression --message="Reloading NGINX web server and PHP-FPM..." --time --weight=1
+ynh_script_progression --message="Reloading NGINX web server and PHP-FPM..."  --weight=1
 
 ynh_systemd_action --service_name=nginx --action=reload
 
@@ -173,4 +172,4 @@ ynh_systemd_action --service_name=nginx --action=reload
 # END OF SCRIPT
 #=================================================
 
-ynh_script_progression --message="Restoration completed for $app" --time --last
+ynh_script_progression --message="Restoration completed for $app"  --last

scripts/upgrade

@@ -12,7 +12,7 @@ source /usr/share/yunohost/helpers
 #=================================================
 # LOAD SETTINGS
 #=================================================
-ynh_script_progression --message="Loading installation settings..." --time --weight=1
+ynh_script_progression --message="Loading installation settings..."  --weight=1
 
 app=$YNH_APP_INSTANCE_NAME
 
@@ -39,7 +39,7 @@ upgrade_type=$(ynh_check_app_version_changed)
 #=================================================
 # BACKUP BEFORE UPGRADE THEN ACTIVE TRAP
 #=================================================
-ynh_script_progression --message="Backing up the app before upgrading (may take a while)..." --time --weight=1
+ynh_script_progression --message="Backing up the app before upgrading (may take a while)..."  --weight=1
 
 # Backup the current version of the app
 ynh_backup_before_upgrade
@@ -55,14 +55,14 @@ ynh_abort_if_errors
 #=================================================
 # STOP SYSTEMD SERVICE
 #=================================================
-ynh_script_progression --message="Stopping a systemd service..." --time --weight=1
+ynh_script_progression --message="Stopping a systemd service..."  --weight=1
 
 ynh_systemd_action --service_name=$app --action="stop" --log_path="/var/log/$app/$app.log"
 
 #=================================================
 # ENSURE DOWNWARD COMPATIBILITY
 #=================================================
-ynh_script_progression --message="Ensuring downward compatibility..." --time --weight=1
+ynh_script_progression --message="Ensuring downward compatibility..."  --weight=1
 
 #
 # N.B. : the followings setting migrations snippets are provided as *EXAMPLES*
@@ -105,7 +105,7 @@ fi
 #=================================================
 # CREATE DEDICATED USER
 #=================================================
-ynh_script_progression --message="Making sure dedicated system user exists..." --time --weight=1
+ynh_script_progression --message="Making sure dedicated system user exists..."  --weight=1
 
 # Create a dedicated user (if not existing)
 ynh_system_user_create --username=$app --home_dir="$final_path"
@@ -116,7 +116,7 @@ ynh_system_user_create --username=$app --home_dir="$final_path"
 
 if [ "$upgrade_type" == "UPGRADE_APP" ]
 then
-	ynh_script_progression --message="Upgrading source files..." --time --weight=1
+	ynh_script_progression --message="Upgrading source files..."  --weight=1
 
 	# Download, check integrity, uncompress and patch the source from app.src
 	pushd $final_path
@@ -138,7 +138,7 @@ chown -R $app:$app "$final_path"
 #=================================================
 # NGINX CONFIGURATION
 #=================================================
-ynh_script_progression --message="Upgrading NGINX web server configuration..." --time --weight=1
+ynh_script_progression --message="Upgrading NGINX web server configuration..."  --weight=1
 
 # Create a dedicated NGINX config
 ynh_add_nginx_config
@@ -152,7 +152,7 @@ ynh_add_nginx_config
 #=================================================
 # UPDATE A CONFIG FILE
 #=================================================
-ynh_script_progression --message="Updating a configuration file..." --time --weight=1
+ynh_script_progression --message="Updating a configuration file..."  --weight=1
 
 
 ### For more complex cases where you want to replace stuff using regexes,
@@ -165,7 +165,7 @@ ynh_script_progression --message="Updating a configuration file..." --time --wei
 #=================================================
 # SETUP SYSTEMD
 #=================================================
-ynh_script_progression --message="Upgrading systemd configuration..." --time --weight=1
+ynh_script_progression --message="Upgrading systemd configuration..."  --weight=1
 
 # Create a dedicated systemd config
 ynh_add_systemd_config
@@ -175,7 +175,7 @@ ynh_add_systemd_config
 #=================================================
 # SETUP LOGROTATE
 #=================================================
-ynh_script_progression --message="Upgrading logrotate configuration..." --time --weight=1
+ynh_script_progression --message="Upgrading logrotate configuration..."  --weight=1
 
 # Use logrotate to manage app-specific logfile(s)
 ynh_use_logrotate --non-append
@@ -183,21 +183,21 @@ ynh_use_logrotate --non-append
 #=================================================
 # INTEGRATE SERVICE IN YUNOHOST
 #=================================================
-ynh_script_progression --message="Integrating service in YunoHost..." --time --weight=1
+ynh_script_progression --message="Integrating service in YunoHost..."  --weight=1
 
 yunohost service add --needs_exposed_ports $port --description="s3 storage" --log="/var/log/$app/$app.log" $app
 
 #=================================================
 # START SYSTEMD SERVICE
 #=================================================
-ynh_script_progression --message="Starting a systemd service..." --time --weight=1
+ynh_script_progression --message="Starting a systemd service..."  --weight=1
 
 ynh_systemd_action --service_name=$app --action="start" --log_path="/var/log/$app/$app.log"
 
 #=================================================
 # RELOAD NGINX
 #=================================================
-ynh_script_progression --message="Reloading NGINX web server..." --time --weight=1
+ynh_script_progression --message="Reloading NGINX web server..."  --weight=1
 
 ynh_systemd_action --service_name=nginx --action=reload
 
@@ -205,4 +205,4 @@ ynh_systemd_action --service_name=nginx --action=reload
 # END OF SCRIPT
 #=================================================
 
-ynh_script_progression --message="Upgrade of $app completed" --time --last
+ynh_script_progression --message="Upgrade of $app completed"  --last