Update to the php7 default pool file

2019-01-30 11:41:59 +01:00 · 2019-01-30 11:41:59 +01:00 · 92a4b25310
commit 92a4b25310
parent 88b948f4f3
1 changed files with 59 additions and 32 deletions
--- a/conf/php-fpm.conf
+++ b/conf/php-fpm.conf
@ -1,10 +1,11 @@
 ; Start a new pool named 'www'.
-; the variable $pool can we used in any directive and will be replaced by the
+; the variable $pool can be used in any directive and will be replaced by the
 ; pool name ('www' here)
 [__NAMETOCHANGE__]

 ; Per pool prefix
 ; It only applies on the following directives:
+; - 'access.log'
 ; - 'slowlog'
 ; - 'listen' (unixsocket)
 ; - 'chroot'
@ -24,28 +25,35 @@ group = __USER__

 ; The address on which to accept FastCGI requests.
 ; Valid syntaxes are:
-;   'ip.add.re.ss:port'    - to listen on a TCP socket to a specific address on
+;   'ip.add.re.ss:port'    - to listen on a TCP socket to a specific IPv4 address on
 ;                            a specific port;
-;   'port'                 - to listen on a TCP socket to all addresses on a
-;                            specific port;
+;   '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on
+;                            a specific port;
+;   'port'                 - to listen on a TCP socket to all addresses
+;                            (IPv6 and IPv4-mapped) on a specific port;
 ;   '/path/to/unix/socket' - to listen on a unix socket.
 ; Note: This value is mandatory.
-listen = /var/run/php/php7.0-fpm-__NAMETOCHANGE__.sock
+listen = /run/php/php7.0-fpm-__NAMETOCHANGE__.sock

-; Set listen(2) backlog. A value of '-1' means unlimited.
-; Default Value: 128 (-1 on FreeBSD and OpenBSD)
-;listen.backlog = 128
+; Set listen(2) backlog.
+; Default Value: 511 (-1 on FreeBSD and OpenBSD)
+;listen.backlog = 511

 ; Set permissions for unix socket, if one is used. In Linux, read/write
 ; permissions must be set in order to allow connections from a web server. Many
-; BSD-derived systems allow connections regardless of permissions. 
+; BSD-derived systems allow connections regardless of permissions.
 ; Default Values: user and group are set as the running user
 ;                 mode is set to 0660
 listen.owner = www-data
 listen.group = www-data
 ;listen.mode = 0660
- 
-; List of ipv4 addresses of FastCGI clients which are allowed to connect.
+; When POSIX Access Control Lists are supported you can set them using
+; these options, value is a comma separated list of user/group names.
+; When set, listen.owner and listen.group are ignored
+;listen.acl_users =
+;listen.acl_groups =
+
+; List of addresses (IPv4/IPv6) of FastCGI clients which are allowed to connect.
 ; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
 ; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
 ; must be separated by a comma. If this value is left blank, connections will be
@ -59,7 +67,13 @@ listen.group = www-data
 ;       - The pool processes will inherit the master process priority
 ;         unless it specified otherwise
 ; Default Value: no set
-; priority = -19
+; process.priority = -19
+
+; Set the process dumpable flag (PR_SET_DUMPABLE prctl) even if the process user
+; or group is differrent than the master process user. It allows to create process
+; core dump and ptrace the process for the pool user.
+; Default Value: no
+; process.dumpable = yes

 ; Choose how the process manager will control the number of child processes.
 ; Possible Values:
@ -96,7 +110,7 @@ pm = dynamic
 ; forget to tweak pm.* to fit your needs.
 ; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
 ; Note: This value is mandatory.
-pm.max_children = 10
+pm.max_children = 5

 ; The number of child processes created on startup.
 ; Note: Used only when pm is set to 'dynamic'
@ -117,12 +131,12 @@ pm.max_spare_servers = 3
 ; Note: Used only when pm is set to 'ondemand'
 ; Default Value: 10s
 ;pm.process_idle_timeout = 10s;
- 
+
 ; The number of requests each child process should execute before respawning.
 ; This can be useful to work around memory leaks in 3rd party libraries. For
 ; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
 ; Default Value: 0
-pm.max_requests = 500
+;pm.max_requests = 500

 ; The URI to view the FPM status page. If this value is not set, no URI will be
 ; recognized as a status page. It shows the following informations:
@ -170,7 +184,7 @@ pm.max_requests = 500
 ;
 ; By default the status page only outputs short status. Passing 'full' in the
 ; query string will also return status for each pool process.
-; Example: 
+; Example:
 ;   http://www.foo.bar/status?full
 ;   http://www.foo.bar/status?json&full
 ;   http://www.foo.bar/status?html&full
@ -215,7 +229,7 @@ pm.max_requests = 500
 ;   last request memory:  0
 ;
 ; Note: There is a real-time FPM status monitoring sample web page available
-;       It's available in: ${prefix}/share/fpm/status.html
+;       It's available in: /usr/share/php/7.0/fpm/status.html
 ;
 ; Note: The value must start with a leading slash (/). The value can be
 ;       anything, but it may not be a good idea to use the .php extension or it
@ -275,7 +289,7 @@ pm.max_requests = 500
 ;      - %{megabytes}M
 ;      - %{mega}M
 ;  %n: pool name
-;  %o: ouput header
+;  %o: output header
 ;      it must be associated with embraces to specify the name of the header:
 ;      - %{Content-Type}o
 ;      - %{X-Powered-By}o
@ -283,7 +297,7 @@ pm.max_requests = 500
 ;      - ....
 ;  %p: PID of the child that serviced the request
 ;  %P: PID of the parent of the child that serviced the request
-;  %q: the query string 
+;  %q: the query string
 ;  %Q: the '?' character if query string exists
 ;  %r: the request URI (without the query string, see %q and %Q)
 ;  %R: remote IP address
@ -291,47 +305,51 @@ pm.max_requests = 500
 ;  %t: server time the request was received
 ;      it can accept a strftime(3) format:
 ;      %d/%b/%Y:%H:%M:%S %z (default)
+;      The strftime(3) format must be encapsuled in a %{<strftime_format>}t tag
+;      e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t
 ;  %T: time the log has been written (the request has finished)
 ;      it can accept a strftime(3) format:
 ;      %d/%b/%Y:%H:%M:%S %z (default)
+;      The strftime(3) format must be encapsuled in a %{<strftime_format>}t tag
+;      e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t
 ;  %u: remote user
 ;
 ; Default: "%R - %u %t \"%m %r\" %s"
 ;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%"
- 
+
 ; The log file for slow requests
 ; Default Value: not set
 ; Note: slowlog is mandatory if request_slowlog_timeout is set
-slowlog = /var/log/nginx/__NAMETOCHANGE__.slow.log
- 
+;slowlog = log/$pool.log.slow
+
 ; The timeout for serving a single request after which a PHP backtrace will be
 ; dumped to the 'slowlog' file. A value of '0s' means 'off'.
 ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
 ; Default Value: 0
-request_slowlog_timeout = 5s
- 
+;request_slowlog_timeout = 0
+
 ; The timeout for serving a single request after which the worker process will
 ; be killed. This option should be used when the 'max_execution_time' ini option
 ; does not stop script execution for some reason. A value of '0' means 'off'.
 ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
 ; Default Value: 0
 request_terminate_timeout = 1d
- 
+
 ; Set open file descriptor rlimit.
 ; Default Value: system defined value
 ;rlimit_files = 1024
- 
+
 ; Set max core size rlimit.
 ; Possible Values: 'unlimited' or an integer greater or equal to 0
 ; Default Value: system defined value
 ;rlimit_core = 0
- 
+
 ; Chroot to this directory at the start. This value must be defined as an
 ; absolute path. When this value is not set, chroot is not used.
 ; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
 ; of its subdirectories. If the pool prefix is not set, the global prefix
 ; will be used instead.
-; Note: chrooting is a great security feature and should be used whenever 
+; Note: chrooting is a great security feature and should be used whenever
 ;       possible. However, all PHP paths will be relative to the chroot
 ;       (error_log, sessions.save_path, ...).
 ; Default Value: not set
@ -347,16 +365,25 @@ chdir = __FINALPATH__
 ; Note: on highloaded environement, this can cause some delay in the page
 ; process time (several ms).
 ; Default Value: no
-catch_workers_output = yes
+;catch_workers_output = yes
+
+; Clear environment in FPM workers
+; Prevents arbitrary environment variables from reaching FPM worker processes
+; by clearing the environment in workers before env vars specified in this
+; pool configuration are added.
+; Setting to "no" will make all environment variables available to PHP code
+; via getenv(), $_ENV and $_SERVER.
+; Default Value: yes
+;clear_env = no

 ; Limits the extensions of the main script FPM will allow to parse. This can
 ; prevent configuration mistakes on the web server side. You should only limit
 ; FPM to .php extensions to prevent malicious users to use other extensions to
-; exectute php code.
+; execute php code.
 ; Note: set an empty value to allow all extensions.
 ; Default Value: .php
 ;security.limit_extensions = .php .php3 .php4 .php5 .php7
- 
+
 ; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
 ; the current environment.
 ; Default Value: clean env
@ -370,7 +397,7 @@ catch_workers_output = yes
 ; overwrite the values previously defined in the php.ini. The directives are the
 ; same as the PHP SAPI:
 ;   php_value/php_flag             - you can set classic ini defines which can
-;                                    be overwritten from PHP call 'ini_set'. 
+;                                    be overwritten from PHP call 'ini_set'.
 ;   php_admin_value/php_admin_flag - these directives won't be overwritten by
 ;                                     PHP call 'ini_set'
 ; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.