Typos

scripts/backup

@@ -6,7 +6,7 @@
 # IMPORT GENERIC HELPERS
 #=================================================
 
-#Keep this path for calling _common.sh inside the execution's context of backup and restore scripts
+# Keep this path for calling _common.sh inside the execution's context of backup and restore scripts
 source ../settings/scripts/_common.sh
 source /usr/share/yunohost/helpers
 
@@ -95,7 +95,7 @@ ynh_backup --src_path="/etc/$app/"
 #=================================================
 ynh_print_info --message="Backing up the MySQL database..."
 
-### (However, things like mysql dumps *do* take some time to run, though the
+### (However, things like MySQL dumps *do* take some time to run, though the
 ### copy of the generated dump to the archive still happens later)
 
 ynh_mysql_dump_db --database="$db_name" > db.sql

scripts/change_url

@@ -45,7 +45,7 @@ ynh_clean_setup () {
 	# Remove the new domain config file, the remove script won't do it as it doesn't know yet its location.
 	ynh_secure_remove --file="/etc/nginx/conf.d/$new_domain.d/$app.conf"
 
-	# restore it if the upgrade fails
+	# Restore it if the upgrade fails
 	ynh_restore_upgradebackup
 }
 # Exit if an error occurs during the execution of the script

scripts/install

@@ -33,14 +33,14 @@ password=$YNH_APP_ARG_PASSWORD
 
 ### If it's a multi-instance app, meaning it can be installed several times independently
 ### The id of the app as stated in the manifest is available as $YNH_APP_ID
-### The instance number is available as $YNH_APP_INSTANCE_NUMBER (equals "1", "2", ...)
+### The instance number is available as $YNH_APP_INSTANCE_NUMBER (equals "1", "2"...)
 ### The app instance name is available as $YNH_APP_INSTANCE_NAME
 ###    - the first time the app is installed, YNH_APP_INSTANCE_NAME = ynhexample
 ###    - the second time the app is installed, YNH_APP_INSTANCE_NAME = ynhexample__2
-###    - ynhexample__{N} for the subsequent installations, with N=3,4, ...
+###    - ynhexample__{N} for the subsequent installations, with N=3,4...
 ### The app instance name is probably what interests you most, since this is
 ### guaranteed to be unique. This is a good unique identifier to define installation path,
-### db names, ...
+### db names...
 app=$YNH_APP_INSTANCE_NAME
 
 #=================================================
@@ -56,8 +56,8 @@ app=$YNH_APP_INSTANCE_NAME
 ### The execution time is given for the duration since the previous call. So the weight should be applied to this previous call.
 ynh_script_progression --message="Validating installation parameters..." --time --weight=1
 
-### If the app uses nginx as web server (written in HTML/PHP in most cases), the final path should be "/var/www/$app".
-### If the app provides an internal web server (or uses another application server such as uwsgi), the final path should be "/opt/yunohost/$app"
+### If the app uses NGINX as web server (written in HTML/PHP in most cases), the final path should be "/var/www/$app".
+### If the app provides an internal web server (or uses another application server such as uWSGI), the final path should be "/opt/yunohost/$app"
 final_path=/var/www/$app
 test ! -e "$final_path" || ynh_die --message="This path already contains a folder"
 
@@ -92,7 +92,7 @@ port=$(ynh_find_port --port=8095)
 ynh_app_setting_set --app=$app --key=port --value=$port
 
 # Optional: Expose this port publicly
-# (N.B. : you only need to do this if the app actually needs to expose the port publicly.
+# (N.B.: you only need to do this if the app actually needs to expose the port publicly.
 # If you do this and the app doesn't actually need you are CREATING SECURITY HOLES IN THE SERVER !)
 
 # Open the port
@@ -176,7 +176,7 @@ ynh_script_progression --message="Configuring PHP-FPM..." --time --weight=1
 ###		- Remove the section "BACKUP THE PHP-FPM CONFIGURATION" in the backup script
 ###		- Remove also the section "REMOVE PHP-FPM CONFIGURATION" in the remove script
 ###		- As well as the section "RESTORE THE PHP-FPM CONFIGURATION" in the restore script
-###		With the reload at the end of the script.
+###		  with the reload at the end of the script.
 ###		- And the section "PHP-FPM CONFIGURATION" in the upgrade script
 
 # Create a dedicated PHP-FPM config
@@ -225,7 +225,7 @@ ynh_app_setting_set --app=$app --key=skipped_uris --value="/"
 # Reload SSOwat config
 yunohost app ssowatconf
 
-# Reload Nginx
+# Reload NGINX
 ynh_systemd_action --service_name=nginx --action=reload
 
 # Installation with curl
@@ -294,7 +294,7 @@ ynh_script_progression --message="Integrating service in YunoHost..." --time --w
 
 ### `yunohost service add` integrates a service in YunoHost. It then gets 
 ### displayed in the admin interface and through the others `yunohost service` commands.
-### (N.B. : this line only makes sense if the app adds a service to the system!)
+### (N.B.: this line only makes sense if the app adds a service to the system!)
 ### If you're not using these lines:
 ###		- You can remove these files in conf/.
 ###		- Remove the section "REMOVE SERVICE INTEGRATION IN YUNOHOST" in the remove script
@@ -307,7 +307,7 @@ yunohost service add $app --description "A short description of the app" --log "
 ###
 ### --needs_exposed_ports "$port" a list of ports that needs to be publicly exposed
 ###                               which will then be checked by YunoHost's diagnosis system
-###                               (N.B. DO NOT USE THIS is the port is only internal !!!)
+###                               (N.B. DO NOT USE THIS is the port is only internal!!!)
 ###
 ### --test_status "some command"  a custom command to check the status of the service
 ###                               (only relevant if 'systemctl status' doesn't do a good job)
@@ -318,7 +318,6 @@ yunohost service add $app --description "A short description of the app" --log "
 ### to proceed if you later realize that you need to enable some flags that
 ### weren't enabled on old installs (be careful it'll override the existing
 ### service though so you should re-provide all relevant flags when doing so)
-###
 
 #=================================================
 # START SYSTEMD SERVICE

scripts/remove

@@ -80,7 +80,7 @@ ynh_remove_nginx_config
 #=================================================
 ynh_script_progression --message="Removing PHP-FPM configuration..." --time --weight=1
 
-# Remove the dedicated php-fpm config
+# Remove the dedicated PHP-FPM config
 ynh_remove_fpm_config
 
 #=================================================

scripts/restore

@@ -6,7 +6,7 @@
 # IMPORT GENERIC HELPERS
 #=================================================
 
-#Keep this path for calling _common.sh inside the execution's context of backup and restore scripts
+# Keep this path for calling _common.sh inside the execution's context of backup and restore scripts
 source ../settings/scripts/_common.sh
 source /usr/share/yunohost/helpers
 

scripts/upgrade

@@ -70,7 +70,7 @@ ynh_script_progression --message="Backing up the app before upgrading (may take
 # Backup the current version of the app
 ynh_backup_before_upgrade
 ynh_clean_setup () {
-	# restore it if the upgrade fails
+	# Restore it if the upgrade fails
 	ynh_restore_upgradebackup
 }
 # Exit if an error occurs during the execution of the script
@@ -81,9 +81,9 @@ ynh_abort_if_errors
 #=================================================
 
 # Normalize the URL path syntax
-# N.B. : this is for app installations before YunoHost 2.7
+# N.B.: this is for app installations before YunoHost 2.7
 # where this value might be something like /foo/ or foo/
-# instead of /foo ....
+# instead of /foo
 # If nobody installed your app before 2.7, then you may
 # safely remove this line
 path_url=$(ynh_normalize_url_path --path_url=$path_url)
@@ -112,9 +112,9 @@ fi
 #=================================================
 # NGINX CONFIGURATION
 #=================================================
-ynh_script_progression --message="Upgrading nginx web server configuration..." --time --weight=1
+ynh_script_progression --message="Upgrading NGINX web server configuration..." --time --weight=1
 
-# Create a dedicated nginx config
+# Create a dedicated NGINX config
 ynh_add_nginx_config
 
 #=================================================
@@ -135,9 +135,9 @@ ynh_system_user_create --username=$app
 #=================================================
 # PHP-FPM CONFIGURATION
 #=================================================
-ynh_script_progression --message="Upgrading php-fpm configuration..." --time --weight=1
+ynh_script_progression --message="Upgrading PHP-FPM configuration..." --time --weight=1
 
-# Create a dedicated php-fpm config
+# Create a dedicated PHP-FPM config
 ynh_add_fpm_config
 
 #=================================================
@@ -201,9 +201,9 @@ ynh_systemd_action --service_name=$app --action="start" --log_path="/var/log/$ap
 #=================================================
 # UPGRADE FAIL2BAN
 #=================================================
-ynh_script_progression --message="Reconfiguring fail2ban..." --time --weight=1
+ynh_script_progression --message="Reconfiguring Fail2ban..." --time --weight=1
 
-# Create a dedicated fail2ban config
+# Create a dedicated Fail2ban config
 ynh_add_fail2ban_config --logpath="/var/log/nginx/${domain}-error.log" --failregex="Regex to match into the log for a failed login"
 
 #=================================================
@@ -221,7 +221,7 @@ fi
 #=================================================
 # RELOAD NGINX
 #=================================================
-ynh_script_progression --message="Reloading nginx web server..." --time --weight=1
+ynh_script_progression --message="Reloading NGINX web server..." --time --weight=1
 
 ynh_systemd_action --service_name=nginx --action=reload